Hardwood flooring has always been a staple for a great interior design. It just don’t give any property a good overhaul, it also adds stylishness and increase property’s value all at the same time. There’s certainly more to love about hardwood flooring. Browse the Internet or visit different local stores and you will be amazed at how wide the variety of options you have. You will certainly never go wrong with hardwood flooring, as it complements well with any property improvement process.
Over the years, hardwood flooring is surprisingly increasing its popularity amongst property owner. If you already have installed this type of flooring in your property, don’t hesitate to bring out the beauty hiding in those elegant hardwood floors. Taking advantage of the hardwood refinishing process is the key to making your property, most especially your flooring even more wonderful. This process takes a lot of planning and preparation. Commit one mistake and surely your project will just go to waste.
Keep reading to have any idea about the hardwood refinishing process.
Being More than just Prepared
This is the most crucial stage when conducting a hardwood refinishing process. Sanding and buffing creates too much dirt so make sure to cover all your furniture and appliances at home properly. Never miss any area of your house that is not sealed or else it will give you so much stress cleaning a significant amount of dust produced by sanding and buffing.
The Sanding Process
Sanding the flooring is important if you want to maintain its premium quality. Sanding is a bit tricky, as you need different grades of sanding papers to get best result. Fist part is you need to sand the floor with a rough grade paper. This allows you to remove the existing finish of the hardwood and change it to a better one. The next level of sanding is crucial, as you need to achieve the exact smoothness in order to apply the new finish you desired. Remember to use a special machine when sanding the edges and hand scrape those that are hard to reach.
The Buffing Process
This process allows you to double check if there are still scratches that have not removed in the sanding process. You should use a buffing machine to better remove unseen scratches on the flooring. Keep in mind that unseen scratches may be highlighted once the new finish is applied. So, make sure to have your hardwood floors buffed after sanding. In addition, buffing is essential to do in between every application of the finish coats to achieve maximum smoothness on the floor surface.
The Importance of Polyurethane
For those that are not familiar with the term, this is the professional term for finish coat used by flooring refinishing experts. There are two types of polyurethane; the oil-base and the water-base. When you go online and visit some local stores, most of what you will see are water-based polyurethane products. Some properties don’t permit the use of oil-based products that’s why water-based ones are commonly available in the market. If you prefer a darker tone for your hardwood finish, use the oil-based one. Oil based products are considered t be more durable, however, by applying several coats of water-based polyurethane, you can also achieve durable results.
Staining isn’t Bad After All
Who would have thought that putting staining would be a great help to make things look even better? This would be a great opportunity for anyone who would want to add some color to their hardwood flooring. The most recommended are those that are oil-based stains. If you are going to use stain, make sure to evenly apply and remove to have good penetration with the wood. Thanks to the ever emerging technology, as there are now ways that allow any property owner to custom stain mixing.
Refinishing hardwood flooring can be daunting and stressful all at the same time. If you are not familiar with the process, make sure to seek help from experts. Refinishing the flooring of your property can bring stylishness and at the same time increase the value of your property.
